Tile-Insert Linear Shower Drain

Recessed linear channel that takes the floor tile for seamless walk-in showers.

Tile-Insert Linear Drain

Recessed channel takes the tile.

Stainless steel linear shower drain with square grate

Linear Drain – Square Grate

300–1200 mm.

Recessed tile-insert stainless steel floor drain

Tile-Insert Floor Drain

Recessed point drain.

A seamless walk-in shower

A recessed linear channel that takes the floor tile, so the shower floor looks continuous with only two slim stainless steel edges. Available in the same five lengths as our square-grate linear drain.

Specifications

Length A	Grate length B	Channel height	Outlet height	Outlet Ø	Width
300 mm	296 mm	25 mm	40 mm	50 mm	80 mm
450 mm	446 mm	25 mm	40 mm	50 mm	80 mm
600 mm	596 mm	25 mm	40 mm	50 mm	80 mm
900 mm	896 mm	25 mm	40 mm	50 mm	80 mm
1200 mm	1196 mm	25 mm	40 mm	50 mm	80 mm

Material AISI 316 (304 optional). Finish matte (standard) or mirror. Odour trap optional. Push-fit outlet.

Where to place a linear drain

Against the wall: the most common choice. The floor falls in one direction, so large tiles can be used with fewer cuts.
Across the shower entrance: keeps water inside the shower area in walk-in and level-access showers.
In the middle of the floor: for wet rooms, with the floor falling from both sides.

Choosing the length

Choose the length closest to the width of the shower area: 300, 450, 600, 900 or 1200 mm. For a wall-to-wall look, choose the nearest length and finish the gap with the tiles.

Why it suits low build-ups

The channel is 25 mm high and the outlet height is 40 mm, with a 50 mm push-fit outlet. That helps where the floor build-up is limited, for example in refurbishments and apartments.

Installation notes

Set the channel at the right level and connect the outlet.
Seal the waterproofing membrane to the channel.
Form a single fall towards the drain.
Bond the tile into the insert so it lines up with the floor tiles.
Fill the trap (if fitted) with water before handover.

What to send us for a quote

Lengths and quantities, tile thickness, finish (matte or mirror), whether you need an odour trap, and the bathroom layout.

Typical applications

Walk-in showersLuxury bathroomsHotel suitesVillasSpas

Frequently asked questions

What tile thickness does it take?

Send us your tile thickness and we will confirm the right channel.

Square grate or tile insert?

Tile insert for a seamless look; square grate for easier everyday cleaning.

How is it cleaned?

The tiled insert lifts out to reach the channel and outlet.

Is it suitable for step-free showers?

Yes. Linear drains are a popular choice for level-access showers.

316 or 304?

AISI 316 is standard and recommended for showers; 304 is optional. See our SS 304 vs SS 316 guide.

Do you supply for hotel projects?

Yes. Hotel suites and spas are typical applications, with data sheets for consultant approval.

Send us quantities, sizes and drawings or site photos and we will reply with options and a price. Request a quote.

Why Choose Alphatek?

Building Materials Supplier for Dubai & the UAE

Alphatek – Delivering drainage solutions that keep your projects flowing.