Grease Trap & Interceptor Supplier in Dubai, UAE

Grease Traps & Interceptors PVC Fabricated – Made in the UAE

PVC fabricated grease traps, oil interceptors, gully traps and sand traps – made in the UAE to your drawings.

PVC Grease Traps, Oil Interceptors & Gully Traps

Alphatek fabricates and supplies PVC grease traps, oil interceptors, gully traps and sand traps for restaurants, commercial kitchens, car parks, workshops and residential buildings across the UAE. Our traps are fabricated from 7.7 mm thick BS EN 1401 PVC sheet, giving a strong, chemical-resistant and fully corrosion-free body.

Grease traps are available in Type A, B and C to suit different kitchen loads, and our PVC oil interceptors are offered in 50 GPM and 55 GPM models with sediment buckets and oil drain buckets for easy maintenance. Every unit can be customised in size, inlet/outlet position and cover type to match your drainage layout and municipality requirements.

Key Features

BS EN 1401 PVCFabricated from 7.7 mm thick BS EN 1401 PVC sheet – strong and corrosion-free.

Type A, B & C grease trapsSized for small cafes up to large commercial kitchens.

Sealed covers15 mm PVC top cover with rubber gasket and SS bolts keeps odours contained.

Removable sediment bucketsPVC sediment buckets with lifting handles for quick cleaning.

Vent & oil drain3″ vent pipe and 50 mm oil drain trap with separate oil drain bucket.

Custom fabricationSizes, inlet/outlet positions and depths made to your drawings.

PVC Oil Interceptor Specification (50 GPM)

Item	Specification
Overall size	825 × 525 mm, 445 mm high
Body material	7.7 mm thick BS EN 1401 PVC sheet
Inlet / outlet	4″ (100 mm) diameter
Vent	3″ (75 mm) diameter vent pipe
Cover	15 mm thick PVC, sealed with rubber gasket and SS bolts & washers
Sediment bucket	PVC bucket with lifting handle
Oil drain	50 mm oil drain trap to separate PVC oil drain bucket (300 Ø × 500 mm)
Models	50 GPM and 55 GPM – other capacities on request

Grease traps Type A, B & C, gully traps (e.g. 200 mm Ø) and sand traps (e.g. 500 × 500 mm) fabricated to order. Drawings provided for approval.

Typical Applications

Restaurants & cafesHotel & commercial kitchensCar parks & washing baysWorkshops & garagesFood factoriesLabour campsMalls & food courtsResidential buildings

Our Product Range

PVC grease trap with lid and removable perforated basket

Grease Traps (Type A, B & C)

PVC fabricated grease traps that separate fats, oils and grease from kitchen wastewater before the drainage line.

Gully Traps

PVC gully traps with water seal to stop odours, for floor and yard drainage connections.

Steel sand trap basket with lifting handle

Sand Traps

PVC sand traps that collect sand and silt from surface water before it enters the drainage system.

Need a non-standard size or a trap for a specific flow rate? We supply grease traps and interceptors made to your drawings and municipality requirements.

Grease trap guides

Why Choose Alphatek

Wide ExpertiseComprehensive and customised solutions with expert advice to meet diverse project needs.

Quality-Assured SupplyProducts sourced from trusted manufacturers and checked before delivery to site.

Customer-Centric ApproachDedicated customer service team providing expert advice and support.

Competitive PricingCost-effective solutions without compromising on quality.

Timely DeliveryEfficient logistics and supply chain management for prompt delivery across the UAE & GCC.

Custom FabricationProducts made to your drawings and site requirements.

Where grease traps are installed

Under the sink – for a single sink or a small group of fixtures; emptied often
Recessed in the floor – serves several fixtures with a cover flush to the floor
External chamber – a central trap for the whole kitchen, with access for desludging

Typical maintenance schedule

How often	Task
Daily	Empty the sediment basket
Weekly	Skim off the grease layer
Monthly	Full clean-out and inspection
Every visit	Keep a cleaning log for inspections

Choosing Type A, B or C

The right type depends on the number of sinks and dishwashers and how busy the kitchen is. Send us your kitchen layout and we will recommend the type.

Oil interceptors for car parks and workshops

For car parks, workshops and wash bays, our PVC oil interceptors separate oil and fuel from surface water – see the 50 GPM specification above.

Grease trap supplier in Dubai, Sharjah & the UAE

Alphatek fabricates PVC grease traps (Type A, B and C) and oil interceptors in the UAE and supplies them to restaurants, hotels, commercial kitchens and contractors in Dubai, Sharjah, Abu Dhabi and across the UAE. Units can be made to your size and inlet and outlet positions. Send your kitchen layout or BOQ for a quote.

DubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairahUmm Al QuwainAl Ain

Frequently Asked Questions

What is a grease trap?

A grease trap separates fats, oils and grease (FOG) from kitchen wastewater before it enters the drainage system, preventing blockages and meeting municipality requirements.

What is the difference between Type A, B and C grease traps?

The types differ in size and capacity to suit different kitchen loads – from small cafes to large commercial kitchens. We help you select the right type for your project.

What is an oil interceptor used for?

Oil interceptors separate oil and fuel from surface water in car parks, washing bays and workshops. Our PVC models come in 50 GPM and 55 GPM capacities.

Why choose PVC?

PVC is fully corrosion-free, chemical resistant and lightweight, and our 7.7 mm BS EN 1401 PVC sheet gives a strong, long-lasting body.

Can you fabricate custom sizes?

Yes. All grease traps, interceptors, gully traps and sand traps can be fabricated to your drawings, inlet/outlet positions and depths.

Need a grease trap or oil interceptor?

Send us the kitchen size or flow rate and your drainage layout – we will recommend the right model and send a quotation.