Looking for stainless steel bollards? Alphatek supplies SS 316 bollards with base plates, in a brushed finish and made to your height and diameter, for hotels, malls, towers and villas in Dubai and across the UAE.
Bollards guide traffic, protect entrances and shopfronts, and mark walkways. In the UAE, stainless steel is the most common choice for entrances because it looks clean and handles heat, sun and humidity. But “a stainless steel bollard” can mean many things, and a few decisions make the difference between a bollard that looks good for years and one that stains, leans or does the wrong job.
This guide covers what to decide before you order: purpose, grade, size, fixing and finish.

1. Decide what the bollard is for
| Purpose | What it does | Typical places |
|---|---|---|
| Guiding and marking | Shows where vehicles and people should go | Walkways, drop-off zones, car park edges |
| Protecting entrances | Keeps cars off pavements, shopfronts and doorways | Hotel and mall entrances, shopfronts, villa gates |
| Architectural | Adds a clean, finished look to the frontage | Towers, offices, residential lobbies |
| Security (anti-ram) | Stops a vehicle deliberately driven at a building | Sensitive buildings; needs specialist tested bollards |
Standard stainless steel bollards are for guiding, marking and protecting entrances from everyday vehicle contact. Where a security consultant specifies tested anti-ram protection, that is a different, specialist product; follow the consultant’s specification.
2. Choose the right grade: SS 316 for the UAE
Outdoors in the UAE, bollards face sun, heat, humidity, sand and, near the coast, salt air. SS 316 resists staining and tea-staining much better than SS 304 in these conditions, which is why Alphatek supplies bollards in SS 316. See SS 304 vs SS 316 for the difference between the grades.

3. Height and diameter
Height and diameter depend on the purpose and the look of the frontage. Taller, wider bollards are more visible and suit vehicle areas; lower, slimmer bollards suit walkways and landscaping. Keep the spacing between bollards consistent and wide enough for pedestrians, wheelchairs and prams, but narrow enough to stop cars passing between them. Bollards can be supplied to the height and diameter on your drawing.
4. Fixing: base plate or embedded
- Base plate: the bollard has a plate at the bottom that is anchored to the slab. It is quicker to install on finished paving and easier to replace.
- Embedded (cast in): the bollard is set into a concrete foundation. It is stronger against impact but needs groundwork.
Base-plate bollards are the usual choice for entrances and finished paving. Check the slab and the anchors with your contractor or consultant, especially where vehicles may hit the bollards.
5. Finish and care
A brushed (satin) finish is the most common for entrances because it hides fingerprints and small scratches. Clean bollards regularly with water and a mild detergent, especially near the sea, to remove salt and dust and keep the surface looking new.
Frequently asked questions
Which stainless steel grade is best for outdoor bollards in the UAE?
SS 316. It resists staining from heat, humidity, sand and salt air much better than SS 304, especially near the coast.
What is the difference between base-plate and embedded bollards?
A base-plate bollard is anchored to the slab through a plate at its base, which is quicker to install and replace. An embedded bollard is cast into a concrete foundation and is stronger against impact.
Can stainless steel bollards be made to a specific size?
Yes. Bollards can be supplied to the height and diameter on your drawing.
Do decorative stainless steel bollards stop vehicles?
They guide traffic and protect entrances from everyday vehicle contact. For security against vehicles driven deliberately at a building, specialist tested anti-ram bollards are needed, as specified by a security consultant.
How do I keep stainless steel bollards looking new?
Wash them regularly with water and a mild detergent to remove salt and dust, especially near the sea.
Need stainless steel bollards?
Send us the number of bollards, height, diameter, fixing type and location, and we will reply with options and a price for Dubai and the rest of the UAE. Request a quote, call or WhatsApp Justin Varghese on +971 54 466 7243, or email sales@alphatek.ae.
More stainless steel products
Stainless Steel Bollards · Stainless Steel Entrance Matting · Stainless Steel Drip Trays