Looking for roof hatches? Alphatek supplies stainless steel roof access hatches in Dubai and across the UAE, made to your opening size in SS 304/316.
A roof access hatch is used rarely but has to work every time: for AC maintenance, tank cleaning, waterproofing inspections and emergencies. On UAE roofs it also has to survive strong sun, sand, dust, the occasional heavy downpour and, near the coast, salt air.
Here is what to decide before you order one.

1. Opening size
Start from how the hatch will be used. A hatch for people climbing a ladder can be compact; a hatch that equipment, filters or tank parts must pass through needs a larger clear opening. Measure the clear structural opening in the slab, not the finished ceiling, and check the size against the ladder or stair below.
2. Upstand curb and weathering
A good roof hatch sits on a raised upstand curb, with a lid that overlaps the curb on all sides. This sheds rain, sand and dust instead of letting them run into the opening. The base flange lets the roof waterproofing be dressed up the curb, which is where most hatch leaks start. Agree the curb height with the waterproofing and roof finish build-up.
3. Stainless steel 304 or 316?
| Grade | Best for |
|---|---|
| SS 304 | Inland buildings and sheltered roofs |
| SS 316 | Coastal towers, Palm and marina areas, roofs near cooling towers or chemicals |
Stainless steel does not need painting and keeps its finish in the sun. Our guide to SS 304 vs SS 316 explains the difference in more detail.
4. Opening aids
A large stainless steel lid is heavy. Gas struts lift it smoothly so one person can open it safely, and a hold-open arm stops it slamming shut in the wind while someone is climbing through. These are the most important safety features after the opening size.
5. Locking
Most roof hatches need to open from inside and stay secure from the roof side. An internal latch with a handle, plus a lock, covers both. For residential towers, think about who will hold the key.
6. Access below the hatch
Plan the ladder or stair with the hatch. A fixed ladder should line up with the opening and give a safe step-off at roof level. Alphatek also supplies GRP and stainless steel ladders to match.
What to send for a quotation
- Clear opening size and quantity
- Roof build-up: slab, insulation, waterproofing and finish thickness
- Stainless steel grade: 304 or 316
- Gas struts, hold-open arm and locking required
- Building location (inland or coastal)
For tank tops and service pits, see our water tank access covers instead of a roof hatch.
Frequently asked questions
What size should a roof access hatch be?
It depends on use. A hatch for people climbing a ladder can be compact, while a hatch for passing equipment needs a larger clear opening. Measure the clear structural opening and check it against the ladder or stair below.
Which material is best for a roof hatch in the UAE?
Stainless steel is a good choice because it does not need painting and handles sun and dust. Use SS 304 for inland buildings and SS 316 for coastal buildings or roofs near chemicals.
How do you stop a roof hatch leaking?
Use a hatch with a raised upstand curb and an overlapping lid, and dress the roof waterproofing up the curb using the base flange. Most leaks start where the waterproofing meets the hatch.
Do roof hatches need gas struts?
For anything but small, light lids, yes. Gas struts let one person open the lid safely, and a hold-open arm stops it closing in the wind.
Can a roof hatch be made to a custom size?
Yes. Alphatek supplies stainless steel roof access hatches made to your opening size.
Need a roof access hatch?
Send us the opening size, quantity, roof build-up and location, and we will reply with options and a price for Dubai and the rest of the UAE. Request a quote, call or WhatsApp Justin Varghese on +971 54 466 7243, or email sales@alphatek.ae.
More in Roof & Planter Drains
Roof Drain & Rainwater Outlet Supplier in Dubai, UAE · Planter Drain with Mesh Dome · Roof Drain Calculator · Dome Roof Drain · Preparing Roof Drainage for the UAE Rainy Season