Need manhole covers in a standard or custom size? Alphatek supplies stainless steel, aluminium, ductile iron and GRP manhole covers in standard sizes and custom sizes for projects in Dubai and across the UAE.
Most problems with manhole covers on UAE sites start with one word: size. A cover is ordered as “600 x 600”, it arrives on site, and it turns out the drawing meant the clear opening, the supplier meant the frame, and the chamber was built 20 mm smaller than both. The result is cut frames, packed gaps and covers that rock under traffic.
This guide explains how manhole cover sizes are described, which sizes are common in the UAE, and what to put on your order so the right cover arrives the first time.

Clear opening, cover size and frame size: three different numbers
Every manhole cover has at least three dimensions, and a quote is only as good as the one you give.
- Clear opening (CO): the open space you can reach through once the cover is lifted. This is the size most drainage drawings and specifications refer to, for example “600 x 600 CO”.
- Cover size: the size of the removable top plate or tray. It is always larger than the clear opening, because it rests on the frame.
- Overall frame size: the outside size of the frame, including its flange. This is the space the frame needs on top of the chamber wall or slab.
Two more dimensions matter on site: the frame depth (how much the frame needs below the finished floor) and, for recessed covers, the recess depth (how deep the tray is, which must suit the tile, stone or screed going into it).
Common manhole cover sizes in the UAE
Sizes vary by project, but these clear openings come up again and again on drainage drawings in Dubai and the wider UAE:
| Clear opening | Typical use |
|---|---|
| 450 x 450 mm | Small inspection chambers, valve and meter access, tight service areas |
| 600 x 600 mm | The most common size: inspection chambers in villas, basements, car parks and podiums |
| 600 x 450 mm | Rectangular chambers along drain runs and narrow corridors |
| 750 x 750 mm | Deeper chambers where a person needs more room to work |
| 900 x 900 mm | Large chambers, plant rooms, pump rooms and tank access |
| Round, 600 mm diameter | Road and utility chambers; often ductile iron |
| Larger openings | Split into several covers on one frame: see multi-part manhole covers |
If your chamber does not match a standard size, do not force a standard cover into it. A custom manhole cover made to size costs less than rebuilding a chamber, and it fits properly.
Size and duty go together
The same 600 x 600 opening can need a very different cover depending on what passes over it. A cover in a villa garden only sees foot traffic, while one in a car park ramp sees cars every few minutes, and one in a service yard sees delivery trucks. Larger openings also need thicker covers or extra support for the same traffic. When you give a size, always say where the cover goes. Our guide to light-duty and heavy-duty covers explains how to describe the traffic.
Recessed covers: the tile decides the depth
Recessed (tile-in) covers are filled with the same tile, stone or pavers as the surrounding floor, so they almost disappear. For these covers, the size on the order must include the recess depth. A 20 mm porcelain tile on adhesive needs a shallower tray than 60 mm interlock pavers or 50 mm marble on a mortar bed. Tell us the floor finish and its total build-up thickness, and the tray depth can be matched to it.
What to send when ordering by size
- Clear opening (length x width, or diameter), and say clearly that it is the clear opening
- Type: solid top, recessed (tile-in), or with a grating
- Material: stainless steel (SS 304/316), aluminium, ductile iron or GRP
- Location and traffic: foot traffic, cars, trucks
- Floor finish and its thickness, for recessed covers
- Quantity of each size, and whether the chamber is already built
- A drawing or site photo with a tape measure across the opening, if you have one
For covers on existing chambers, measure the opening yourself before ordering. Our measuring guide shows how. For material choice, see how to choose a manhole cover material in Dubai.
Frequently asked questions
What is the most common manhole cover size in the UAE?
600 x 600 mm clear opening is the most common size for inspection chambers in villas, buildings, basements and car parks. 450 x 450 mm, 600 x 450 mm, 750 x 750 mm and 900 x 900 mm are also widely used.
Is a 600 x 600 manhole cover 600 mm on the outside?
Usually not. 600 x 600 normally refers to the clear opening. The cover and the frame are larger, so always confirm whether a size is the clear opening, the cover size or the overall frame size.
Can I get a manhole cover in a non-standard size?
Yes. Custom manhole covers can be supplied to suit existing chambers, so you do not need to rebuild the chamber to fit a standard cover.
How deep should a recessed manhole cover be?
The recess depth should suit the floor finish that goes into it, for example porcelain tile on adhesive, marble on a mortar bed or interlock pavers. Give the total thickness of the finish when ordering.
What should I do if my opening is larger than 900 x 900 mm?
Large openings are usually covered with multi-part covers: several smaller covers on one frame with removable support beams, so each piece stays light enough to lift.
Need manhole covers in a specific size?
Send us the clear openings, cover type, material, floor finish and quantities, and we will reply with options and a price for Dubai and the rest of the UAE. Request a quote, call or WhatsApp Justin Varghese on +971 54 466 7243, or email sales@alphatek.ae.
More in Manhole Covers
Multi-Part Manhole Covers – Dubai, UAE · Water Tank Access Covers – Dubai, UAE