Alphatek

How to Measure a Manhole or Drain Cover for Replacement

Looking for a supplier? Alphatek is a manhole cover supplier in Dubai and the UAE: stainless steel, aluminium, ductile iron and GRP covers, plus access covers.

A replacement cover that is a few millimetres out will rock, trip people or not fit at all. Most ordering mistakes come from measuring the wrong thing, for example the old cover instead of the opening it has to cover. This checklist shows what to measure and what to photograph before you order.

Aluminium manhole cover installed in paving

The four sizes that matter

MeasurementWhat it isWhy it matters
Clear openingThe inside size of the chamber openingCovers are usually named by this size, for example 600 x 600 mm
Overall frame sizeThe outside edge of the frameDecides whether the new frame fits the space in the floor
Frame depthFrom the top of the frame to its bottomSets how much the floor must be cut or built up
Tray depth (recessed covers)The depth available for tiles or paversMust suit the floor finish thickness

Step by step

  1. Lift the old cover and measure the clear opening of the chamber, length and width, at the narrowest point
  2. Measure the overall frame from outside edge to outside edge
  3. Measure the frame depth and, for recessed covers, the tray depth
  4. Note the shape (square, rectangular or round) and whether the cover is one piece or split into parts
  5. Note the location: footpath, garden, inside a building, or an area with cars or trucks
  6. Take photos of the cover, the frame and the surrounding floor, with a tape measure in the picture
SS 316 recessed manhole cover 600 x 600 mm

Choosing the right type

  • Light-duty or heavy-duty: pick the duty from where the cover sits. Areas with vehicles need a heavy-duty cover; gardens and footpaths can use light-duty. See light-duty vs heavy-duty covers
  • Recessed or solid top: recessed covers take the same tiles or pavers as the floor, so they blend in
  • Sealed: water tanks and odour-sensitive areas need a gasketed, sealed cover
  • Material: stainless steel 304/316 for wet and coastal areas, aluminium for light weight, ductile iron for roads, GRP for corrosive areas

Not sure which one? Try our manhole cover selector.

Frequently asked questions

What size is a standard manhole cover?

Common clear openings are 450 x 450, 600 x 600 and 900 x 900 mm, but many chambers are made to other sizes. Always measure the actual opening.

Do I measure the cover or the hole?

Measure the clear opening of the chamber and the overall frame. The old cover size alone can mislead, especially if the frame is damaged.

Can you make a manhole cover to a custom size?

Yes. We supply custom manhole covers made to the measured size. See our custom manhole covers page and send us the measurements.

What is a recessed manhole cover?

A cover with a tray that is filled with the same tiles, pavers or screed as the floor around it, so it blends into the finish.

How do I know if I need a heavy-duty cover?

If cars, vans or trucks can drive over it, choose heavy-duty. For gardens, footpaths and indoor areas, light-duty is usually enough.

Order a replacement cover

Send us the measurements and photos, and we will suggest a cover that fits. We supply across Dubai, Abu Dhabi, Sharjah and the rest of the UAE, including custom manhole covers. Request a quote or email sales@alphatek.ae.

Scroll to Top
Hi! 👋 Need a product or a quotation? Ask me.